 UV Chamber Scheme
A correct UV lamp chamber will help us to:
1. Accelerate, monitor and optimize the tanning effect on white wood when applying Italian Golden Ground A.
2. Accelerate drying time and make easier the polymerization process (homogeneous film formation) of grounds, colours and oil varnishes.
3. Avoid the deposit of dust particles on varnishes.
4. Save time work, since we do not depend on availability and intensity of solar light.
The interior of the UV chamber can be lined with aluminum paper (or similar) to increase the capture of UV light radiation.
The use of "rotay motor" and "extractor" should be considered by the user depending on the particular needs of use.
The exposure time, under normal conditions, could range from 6 to 12 hours.
The types and references of the lamps shown in the drawing are examples. There could be other lamps in the market with the same characteristics.
¡ATENTIÓN!
.- Always :open the UV chamber with the lamps turned off.
.- Never : look at the light.
.- Do NOT expose skin or eyes to the UV radiation. As the sun (but in less time) could cause sunburn on skin and damages on retina.
.- It is better to locate the UV chamber in a different room from where you work.
| 
