Application Guidelines
These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.
Refractive Grounds must be well and evenly spread to subserve their penetration into the pores.
They are ready-for-use products, so there is no need to dilute them. However, if necessary, they can be diluted. You must test its compatibility with any solvent used, and do not dilute the whole product, but the proportion you will immediately use.
Apply thin layers. Typically, thin-film applications need about 10 hours under UV light to ensure complete drying. Allow 12-24 hours to pass before applying the next coat.
Final sanding is recommended before varnishing, with intensity depending on the obtained result.
Complete drying of each layer is essential to guarantee the quality and durability of the final coating and to avoid future surface defects.