Technical Gelatine

From 4,00 €

Technical Gelatine is used as a protein primer. It is a pure form of glue made from delicate animal tissues and refined with greater care and purity than ordinary glue.

The main goal of this treatment is to homogenize the wood porosity and form a barrier to obtain a more regular and controlled penetration of the grounds. This step is essential to avoid colour patches from the uneven penetration of products applied after this.

Format

Clear

SKU: 19070-1 Category: OW Auxiliary products & Raw Materials

Safety Data Sheet and Classification

Please read the Material Safety Data Sheet (MSDS).

Classification and Security

Application Guidelines

These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.

Dissolve 2-3 gr of Technical Gelatin in 100 ml of warm water (40-45 ºC) and stir until blended. The solution must be fresh for use.

Apply using a sponge or brush. Spread the product evenly on the surface for varnishing.

Special drying conditions are not needed. A hairdryer can be used to accelerate the process. Before applying a second layer, rub the surface with a clean linen cloth to make it softer.

When the last layer is totally dry, rub again with the cloth. A shiny film will appear on the wood if an excess product exists. Clean this area again with a wet cloth and let it dry.

Security and Storage

Security

According to Regulation No 1272/2008 (CLP), this product is not a hazardous substance or mixture for health or the environment.

The material is readily biodegradable.

Protective gloves against minor hazards and panoramic goggles against splashes and/or projections are recommended to prevent eye or skin contact.

Storage

Store it in its original container, tightly closed and cool, and do not expose it to direct light or outdoor elements. Avoid heat, radiation and static electricity.

Under standard conditions, the Technical Gelatine is stable for over two years.